Hydraulic Panels


- 4-way/3-position control valve allows control of double acting actuators
- Control valve shear seal designed for lower maintenance
XH2, Self-Contained Hydraulic Control Panel
- Zero Leakage
- Provides a local source of hydraulic pressure up to 3000 psi
- The manual pump design means no external power is required
- Continuously energized failsafe solenoid - Can accommodate customer's solenoid of choice
- Hydraulic interface for fire loops and manual shutdown
- Simple hydraulic circuit and high-quality components ensure high reliability
- Very low maintenance
- Low cost, simple to install
- Low cost, simple to install
The AMHP is built to the same standards as all Axiom self-contained products, with thousands of installed units providing reliable service
- Suitable for Class 1 Hazardous Areas
- Components rated to operate from -40°C to +85°C ambient temperature
- Environmentally friendly: The hydraulic circuits are enclosed in an aluminum box that holds any oil leakage to prevent ground contamination
- All components accessible - easy maintenance
- Intruder protection: The enclosure may be padlocked to prevent unauthorized access to the internal components
- No sliding seals means no risk of the device failing because of lubricants drying out, no need for periodic disassembling, cleaning and lubricating
- Low-pressure pilot circuit ensures that the hydraulic circuits are leak free even if operating with low-viscosity hydraulic fluids
Hydraulic Control Unit
The Axiom Hydraulic Unit was designed to be easily portable. It weighs less than 30 lbs with overall dimensions of 18" x 19" x 15". It has the following features:
- 4-way/3-position control valve allows control of double acting actuators
- Control valve shear seal designed for lower maintenance
- 15:1 Standard pressure amplification (other ratios available)
- Manual backup
- 2.2 gallon reservoir with fill cap and strainer
- Pressure control via pneumatic regulation requires less maintenance
- Protected high-pressure gauge
- High-pressure manifold and bleed valve
Hydraulic Schematic
Flow Characteristics